Last Modified: 11-29-2007 1.6 A
Service Category: Vehicle Interior Section: Lighting (int)
Model Year: 2008 Model: Sequoia Doc ID: RM000003GLO000X
Title: LIGHTING (INT): ROOM LIGHT SWITCH: INSTALLATION (2008 Sequoia)

INSTALLATION

1. INSTALL INTERIOR DOME LIGHT SWITCH ASSEMBLY

(a) Engage the 2 claws and install the interior dome light switch.

2. INSTALL INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY INTERIOR PANELS / TRIM: INSTRUMENT PANEL SAFETY PAD: INSTALLATION (2008 Sequoia)+

3. INSTALL LOWER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY LH INTERIOR PANELS / TRIM: INSTRUMENT PANEL SAFETY PAD: INSTALLATION (2008 Sequoia)+

4. INSTALL INSTRUMENT SIDE PANEL LH

HINT:

Use the same procedure as for the RH side INTERIOR PANELS / TRIM: INSTRUMENT PANEL SAFETY PAD: INSTALLATION (2008 Sequoia)+ .

5. INSTALL COWL SIDE TRIM BOARD LH

HINT:

Use the same procedure as for the RH side INTERIOR PANELS / TRIM: ROOF HEADLINING: INSTALLATION (2008 Sequoia)+ .

6. INSTALL FRONT DOOR SCUFF PLATE LH

HINT:

Use the same procedure as for the RH side INTERIOR PANELS / TRIM: ROOF HEADLINING: INSTALLATION (2008 Sequoia)+ .